PET stretch-blow systems are the largest single category of blow molding machines at the show. New versions offer higher outputs, increased flexibility, easier changeovers, and greater versatility to handle complex or “difficult” bottle shapes.
In one-stage injection-stretch-blow (ISBM) systems, Pet All Manufacturing (Booth W6545) is exhibiting for the first time its new ISBM-180E all-electric unit. The four-station rotary machine has a 15-ton clamp and handles six to 10 cavities for containers from 10 to 100 ml.
Kiefel Technologies (Booth W2727) is showing for the first time in the U.S. the Blowliner single-stage ISBM machine from its subsidiary Mould & Matic Solutions. Major advantages of this machine are said to be its compactness and versatility. It can process PET, PP, and HDPE; it can also be upgraded to multilayer barrier applications. It can mold containers from 10 ml to 5 L on the same machine.
In its largest NPE booth ever (Booth S19045), Nissei ASB Machine Co. is bringing five stretch-blow machines—both one-stage and two-stage—to Orlando, demonstrating a number of upgrades and special options that enhance productivity and allow production of a wide range of specialty PT containers from beer bottles, airline liquor miniatures, and sports drinks to premium cosmetics and wide-mouth jars that can accept a metal lug cap. One new model, ASB-150DPX, is said to be the “world’s first triple-row, one-step injection stretch-blow machine.” Making its debut in the Americas, this machine is molding 50-ml airline liquor miniatures in what ASB says is an “unprecedented” 48 cavities with a cycle time of 8.6 sec, for output greater than 20,000 bph.
In two-stage (reheat) machines, Pet All is showing the new CPSB-1000 LLE all-electric machine from Chum Power in Taiwan. This linear machine has continuous motion of preforms. It molds large containers of 10-20 L.
KHS Group (Booth S12045) has developed a new version of its high-output InnoPET Blowmax rotary RSBM system to meet rising demand for single-serve beverage bottles in the 250- to 800-ml size range. The system is more compact, but its small mold carriers process up to 2500 bottles/hr per station.
KHS also is showing off its Factor 100 PET bottle that debuted last fall at the Drinktec show in Germany. At 5 g, it’s said to be the lightest known half-liter PET bottle for still water.
W. Amsler Equipment (Booth S21067) has introduced the next generation of its linear stretch-blow molder as well as a newly enhanced leak tester. The L42X all-electric reheat machine offers several new features for custom PET blow molders, including preferential heating, neck orientation, and hot-fill capability. It can make containers up to 2 L in four cavities at up to 6500/hr. It can also run two-cavity molds for containers up to 5 L. Neck finishes range from 18 to 70 mm.
SIDE S.A. of Spain (Booth S16084) is presenting its new generation of linear reheat machines. These include the model 2006e, which takes up to six cavities for products from 250 ml to 3 L and output up to 10,000 bph. Model 2003eG is a two-cavity unit for up to 10 L containers and outputs from 2200 to 2600 bph.
SIDE will also feature its T-handle technology (also shown at NPE2015), which produces PET jugs with a pinched handle up to 36 mm deep through compression molding in the tool.
1Blow of France (Booth S14089), which supplies extremely compact RSBM systems, will highlight its next-generation Model 4LO for custom PET bottles. This all-electric system runs up to four cavities and bottles up to 2.5 L. It can accommodate preferential and offset-neck heating; neck orientation for flip-top caps (without requiring a tab or notch in the preform neck); heat setting; base inversion for hot filling; and Sure Grip, which imparts a deeper grip into the bottle than can be produced in standard stretch-blow systems.
Terekas UAB of Lithuania (Booth S10196) will present the newest version of its highly versatile FlexBlow RSBM system. The FlexBlow 2 WM is able to produce both wide-mouth (up to 110 mm) and narrow-neck (18-mm) containers. It can mold up to 73-mm necks in two cavities and wider in one cavity. Bottles from 1.5 to 3 L can be molded at 700 to 750/hr. Changing the bottle format, including molds, neck, and gripper parts, and fine-tuning the machine settings afterward, reportedly takes no longer than 30 min. Another new feature is customized preform grippers made by 3D printing. They allow for very precise detailing in custom designs.
PET Technologies GmbH of Austria (Booth S10057) has brought to market its fourth generation of reheat machines, called APF-Max, with output range 6000 to 14000 bph for bottles of 0.2–3 L. The series has 4, 6, or 8 cavities. A machine can be upgraded from 7000 bph to 14000 bph by installing extra ovens and mold cavities. The company says 15 min are enough to change the blow mold and start production of another bottle format. Only 2 hr are needed for changeover to another preform neck standard.
Despite what many people think, a ban on plastic bags would do more harm than good. A new initiative from the Plastics Industry Association highlights these and other economic impacts—aiming to change the conversation around plastics.
After years of closely monitoring an increasingly worrisome labor shortage, the Plastics Industry Association’s warnings about the widening gap between the sector’s need for skilled workers and the supply of such employees have shifted to full alarm. The association calls for “collaborative response across all levels of government and all manufacturing sectors” to tackle this critical issue.
Here’s more news in engineering resins, TPEs, bioplastics, polyolefin film grades, PVC, and a range of additives from the Big Show not reported in all our other previous coverage.
3 Gallon Blow Moulding Machine Wholesaler Quotes & PriceList
Blow Moulding Machine, Blow Molding Machine, Pet Blow Moulding Machine - Bengo,https://www.cnbengo.com/